Some Points for Attention After Getting Gyratory Screen

There are some points for attention after getting our gyratory screen.

(1) You need to connect the motor cable yourself to start running. Users can choose the length of cable according to their needs.
Both of the positive turn and reverse of the gyratory screen machine do not affect the screening effect in theory.

(2) Screw the hanger and beam together first. The hooks on the rope must hook up the rings on the four corners
of the sieve machine base. Adjust the balance of the whole gyratory screen machine by adjusting the screws
in the middle of the four hang ropes.

(3) The user needs to build a platform according to the size of the gyratory screen machine and the required height.
This platform is used to place the sieve machine. We suggest you can consider using H shaped steel or I-beam steel
for this platform.

(4) When you want to replace the screen of the gyratory screen, open the cover by opening the
Compensating Clamps as shown below, which is quite easy for the user.

(5) We use Clips to tension the screen surface, which maintains a uniform tensile force across the screen surface,
ensuring the system with extremely high screening accuracy, reducing blockage of the mesh and increasing screen
service life. Please check the screen replacement method video of the gyratory screen below.

Our factory can produce and supply many kinds of screening equipments and the spare parts, such as rotary vibrating sieve, linear vibrating screen, ultrasonic separator, inline vibrating separator, flow-thru separator, vibrating control screen, tumbling screen machine, gyratory sifter, centrifugal sifter, airflow screen, wet screening machine, dewatering screen, trommel screen, test sieve shaker, vibrating feeder, vibrating motor etc. Welcome to visit our website http://www.urmachinery.com to learn more about our products.